Description
DIMENSIONS (L x W x H)
- EXTERNAL (MM) – 2991 x 2438 x 2438
- EXTERNAL (FT) – 9’10’’ x 8’ x 8’
WEIGHT
- TARE – 2460 KGS / 5423 LBS
- PAYLOAD – 10540 KGS / 23237 LBS
- MAX GROSS WEIGHT (MGW) – 13000 KGS /28660 LBS
CAPACITY
- VOLUME – 7570 L / 2000 GALS
PRESSURES
- WORKING – 4 BAR / 58 PSI
- TEST – 6 BAR / 87 PSI
- VACUUM – .4 BAR / 5.8
ADDITIONAL FEATURES
- Shell Material: EN 10028-7 1.4401/04 (316/316L) Stainless Steel
- Design Temp: -20°C to +130°C or -40°C to +130°C
- Design Code: ASME VIII Division 1 where applicable
- Frame:
- Forklift Pockets: Loaded Lift Fork Pockets – 300mm x 100mm, 1500mm centres
- Lifting Lugs: Fitted with Lifting Sling and Shackles to DNV2.7-1 (2017)
- Fittings:
- Manlid: Fort Vale 500mm, Hinged with 8 Point Fastenings
- Airlines: 1” BSP Top Mounted Ball Valve Leading to Secondary Ball Valve Operable from Ground Level and C/W 1” BSP End Connector and Retained Dustcap
- Vent: Top Positioned 1 ½” BSP Fort Vale Ball Valve C/W Provision for Pressure Gauge, with Retained Dustcap
- Bottom Outlet: Fort Vale 3” NB Fort NB Fort Vale 45° Footvalve, 3” Butterfly Valve, 3” BSP Connection and Retained Dustcap. Remote Closure
System Fitted. - Safety Relief Valve: 2 ½” BSP Super Maxi Pressure / Vacuum Valve Set at 4.4 Bar/0.21 Bar (63.8/3 psi) with Flame Gauze Fitted
- Level Gauge: Bayham Level Gauge Fitted to Tank Body Adjacent to Bottom Outlet
- Steam Heading: 4 Run Steam Heating System
- Pressures: 4.0 Bar Working. 6.0 Bar Test
- Connections: 1” BSP Inlet, ¾ ” BSP Outlet, each with Retained Dustcap
- Approvals: T11 UN Portable Tank (Covering IMDG, ADR/RID, CFR), DNVGLST-E271 (2017), BS EN ISO 10855 (2018)
